3421-Triaxial Stress Path test chamber (capacity 200 psi-1.4 MPa) with Support for Bender/Extender elements (hole and fixture at the bottom and access port from top), Supports specimens with diameter and height up to 3.0in (75 mm) and 7.5in (200 mm)

3451-Triaxial Stress Path test chamber (capacity 500 psi-3.5 MPa) with support for Bender/Extender elements (hole and fixture at the bottom and access port from top), Supports specimens with diameter and height up to 3.0in (75 mm) and 7.5in (200 mm)

Top cap and Pedestal supporting Bender Elements

Features:

1. includes (4) high pressure rated no-volume change Stainless Steel valves

2. Two independent drainage ports to top cap controlled with no-volume change valves

3. Two independent access ports to pedestal controlled with no-volume change valves

4. Two Access holes from the top of the chamber for internal/on specimen sensors (2 seal plug included, plug with threaded pass-through holes for cable entry can be ordered separately)

5. Two 1/8 NPT access holes on top (one with a high-pressure quick disconnect and one with removable plug)

6. High pressure rated 1/8” tubes

7. 200 psi version includes a polycarbonate jacket and 500 psi version includes a hard coat aluminum jacket

8. Brass coil protects tubes from collapsing under pressure and prevents possible leak

9. This low profile triaxial cell has a footprint of less than 8.5 in (216mm) and 15.5 in (394 mm) height (without the loading piston) and will fit a wide variety of frames and will not occupy a large space.

Several types/dimensions of Caps and pedestals and other accessories are available upon request.

For custom sizes and more information please fill out this form: